Safety Vests Detailed

Surveying & Construction
Instruments & Supplies

A D A P T I V E C O M F O R T

Class 2 Safety Utility Vests

8069 Class 2 SUV with Mesh Back

The 8069 is a 100% polyester SUV manufactured to meet ANSI/ISEA 107-

2004 Class 2 standards. This vest is based on the popular SECO 8068-Series. Standard Features of the 8069

Climate Control: The 8069 features a cool, comfortable mesh back. Cargo Room: The special compartments include a ﬁeld notebook pocket, pencil slots, compass pocket with grommet, ﬂaggin g tape pocket with grommets, and inside pockets. There’s an exterior radio mic clip on

this model also! This model is available in either ﬂuorescent orange
or ﬂuorescent yellow, in sizes XS to J. Made at Geo de SECO, Mexico.

8265 Class 2 Safety Utility Vest with Outlast Adaptive Comfort Collar

This vest was developed in conjunction with surveyors from the California DOT. It meets

ANSI/ISEA 107-2004 Class 2 federal mandatory requirements.

Safety features include bright ﬂuorescent material, 4inch (10.16-cm) wide contrasting reﬂective material with 2inch (5.08-cm) wide silver stripes made of 3M™ Scotchlite™ reﬂective material.This vest is made of durable ANSI/ISEA compliant polyester and polyester mesh. Other high-quality componentsinclude brass grommets, heavy-duty webbing and trim, and a genuine YKK™ zipper. The padded collar is made of Outlast® fabric to help regulate body temperature.Carrying lot’s of gear? Not a problem for this vest. It comes with four large pockets on the outside and two generous pockets on the inside. Great for ﬁeld books, tapes, pencils, ﬂagging, cell phones, etc. Fold the ﬂap up on the left breast pocket for easy access to pencils and markers. Pen and pencil slots now have a special ‘stiffener’ sewn in to keep items in place. Two new spray can holders on the hips of the vest include straps for keeping the cans in place until you

need them.This vest also comes with two convenient mic clips—one above each breast pocket. Sizes range from S to J. Also available in ﬂuorescent yellow. Made at Geo de SECO, Mexico.

8365 Class 3 SUV

This SECO vest meets the standards for the ANSI/ISEA 107-2004

Class 3 speciﬁcations.

This vest was developed in conjunction with surveyors from the California Department of

Transportation. It is made from durable ANSI/ISEA compliant polyester and polyester mesh.This vest has YKK zippers. It has 4inch (10.16 cm) wide reﬂective tape with 2-inch (5.08 cm) wide silver stripes made with 3M Scotchlite Reﬂective Material. The padded collar is made with Outlast fabric on the inside. This vest features multiple pockets for cell phone, tapes, radio, pencils, maps, spray cans, etc., plus two inside pockets. It comes with dual mic clips. The sizes range from M to J. This vest is available in ﬂuorescent orange and ﬂuorescent yellow. Made at Geo de SECO, Mexico.

Class 3 Safety Utility Vests

8390 Class 3 SUV

This new vest meets ANSI/ ISEA 107-2004 Class 3 standards for reﬂectivity.It’s manufactured with tricot and textured Polyester mesh for durability and comfort.Features include three front outside pockets and a mic clip.

These vests stay cool in the summer heat and are highly visible in low-light conditionsThe 8390 has 3-in (7.62 cm) wide reﬂective tape with 2in (5.08 cm) wide silver stripesThere are four sizes available (Large, XL, 2X, 3X) in ﬂuorescent orange and yellow. Imported.

8368 Class 3 SUV

This SECO vest meets the standards for the ANSI/ISEA 107-2004 Class 3

speciﬁcations. It’s speciﬁcally designed for highspeed trafﬁc areas and/or where workers need to be as conspicuous as possible. It features 2inchwide retroreﬂective tape on the ﬂuorescent body and sleeves. The pocket layout is the same as the 8068 SUV.Other features include convenient pockets with ﬂaps (including the map pocket) for items like pensandpencils, notebooks, a radio and ﬂagging tape.The durable ﬂuorescent fabric is constructed of 100% texturized polyester for softness, comfort, superior strength, and abrasion resistance. Four sturdy snaps keep the vest closed. This model is available in ﬂuorescent orange and ﬂuorescent yellow, in sizes from XS to J and is machinewashable.

8374 Class 3 Mesh SUV

This SECO mesh vest meets the standard for the ANSI/ ISEA 107-2004 Class 3 speciﬁcations.

It features 2inch wide retroreﬂective tape on the ﬂuorescent body and sleeves. Its comfortable, relaxed ﬁt is due, in part, to the large neck opening, four high-quality snaps, and the new 70D mesh polyester material.As with many SECO vests, this one features a radio mic clip, pockets and pen/pencil slots. It also sports ‘hand-warmer’ pockets, 5 and 6.5-inch deep outer pockets!This model is available in ﬂuorescent orange and ﬂuorescent yellow, in sizes from XS to J and is machine-washable. Made at Geo de SECO, Mexico.